If you compare ceramic tiles to other coating materials, the results of market research and testing, as well as practical experience, show that they have superior product properties. Most importantly, long-lasting beauty and ease of maintenance are fundamental values. All glazed and unglazed tiles have surface characteristics that make them easy to clean. Ceramic tiles are impervious to acids, alkalis, and solvents, among other things. As a result, virtually all commercially available cleaners are effective at cleaning the surface of ceramic tiles. Aside from hydrofluoric acid, it will cause damage to ceramic tiles, particularly the glaze. As a result, ceramic tiles should not be cleaned with detergents that contain fluoric acid or derivatives of fluoric acid.

Is it possible to clean tiles properly without damaging them?
There is an old truth that still holds true today: dirt that has not been brought into the building does not need to be removed. The foot cleaning grille and treadmill that are attached to the entrance contribute to the long-lasting beauty of the cleaning surface and tile floor. It is critical to understand the quality and degree of contamination of dirt in order to ensure that proper cleaning methods are used. Unfortunately, there has not yet been a breakthrough in the development of cleaners that are effective in all situations, regardless of dirt.

The following principles must be followed when cleaning:
It is necessary to allow the cleaner to work for an extended period of time in order to effectively remove dirt. Cleaning is made easier with the help of mechanical brushing or wiping. When cleaning glazed tiles, particularly rough glazed tiles, it is important to avoid the use of cleaning cloths and brushes that contain abrasive-promoting ingredients. A cleaning cloth, for example, should be used to carefully remove dirt from the surface. There is a floor drain in the room where you can use it to wash away all of the dirt. You can also use a vacuum cleaner. If the loose dirt is not carefully removed, it will eventually spread to the surface, resulting in an unsatisfactory final result, as shown in the photo.

Cleaning options and cycles are available.
Cleaning the premises as a preliminary step
The first cleaning is performed immediately following the completion of the tile work. Using a sweeping motion, remove any loose substances before washing with a neutral or alkaline cleaning solution. Acidic or alkaline cleaning products are used in private residences. Acid cleaners are the only way to remove cement residues, hydraulic fixative residues, and sealant residues from a ceramic surface because they are chemically reactive. Acid cleaners have corrosive properties. As a result, avoid contact with the skin as well as contact with clothing. Always use rubber gloves and follow the manufacturer’s instructions for proper use and safety precautions.

It is very important!
Each tile surface is made up of a combination of tiles and joints. Corrosive acid cleaners react with cement-based joints, resulting in corrosion. As a result, it is necessary to water the tiles in order to soak the joints. Immediately following the acid treatment, the surface must be thoroughly rinsed.

Cleaning on a regular basis
Cleaning on a regular basis is simple, and it can be done at different times depending on the amount of dirt present and the method of operation. Cleaning should be done on a regular basis, whether once a week, once a day, or even several times a day, especially in areas where surfaces are frequently used. The majority of the time, warm water containing a general-purpose cleaner that is suitable for cleaning is sufficient for cleaning. It is not necessary to clean and treat the area on a regular basis. On the contrary, the surface will become sticky for a long period of time as a result of the oil and synthetic coating.

Cleaning and dirt removal on a basic level
Regular intensive cleaning, in particular to remove all types of dirt from unglazed clinker surfaces and clinker surfaces coated with anti-skid glaze, is referred to as “basic cleaning.”Alkaline cleaners are appropriate for use as fundamental cleaners. Grinding powder can be used to mechanically promote cleaning on unglazed clinker surfaces if the manufacturer’s recommendations are followed.

Following the installation / stitching process
Depending on the roughness of the ceramic tile surface, a visible cement adhesive layer will remain on the ceramic tile surface for a longer or shorter period of time. As a result, this layer will absorb dirt, making cleaning and maintaining it a difficult task. As a result, the new tile surface must be spotless with acid cleaner a few days after it has been laid. Before applying acid to floors or other tiles that will be cleaned, they must first be thoroughly watered and allowed to penetrate into the joints.

Remove dirt that has clung to your clothes.
Alkaline cleaner is used to remove oil and grease from the surface of ceramic tiles, and it is a high-performance cleaning agent.

Kitchen and sanitary facilities are provided.
When lime in water dries, it leaves unsightly drying marks on the surface. Aside from dirt and grime from the environment, skin fat and soap residues will also stain the surface of ceramic tiles. A layer of gray dirt will accumulate beneath the shower, on and around the bathtub wall, and at the roots of supports and accessories, among other places. A special cleaner can be used to easily remove the dirt layer from the surface. A few drops of this substance applied to the surface of a wet sponge is sufficient to remove the dirt that has accumulated. Rinse the surface thoroughly with clean water to ensure that it is clean and shiny. Before applying acid to the tiles, they must be thoroughly watered. Grease and other dirt are easily absorbed into the shallow seams of kitchen tiles, resulting in a darkened appearance. It is possible to clean the joints with a cleaner. If the joint has been treated with a joint protector to prevent dirt from penetrating the joint, it is relatively simple to keep the joint clean and healthy.

Ceramic tile for use indoors
Because the glaze on glazed tiles is completely tight, cleaning glazed tile floors is a breeze. Cleaning the surface of ceramic tiles with a general cleaner designed for this purpose can be accomplished by mixing clean water with a general cleaner designed for this purpose. Unglazed tiles are more susceptible to being adhered to by dirt due to their rough surface. As a result, in addition to the cleaning agent, mechanical force must be applied to the surface in order to effectively remove the dirt from the ceramic tile. The use of intensive so-called dry pressing technology on the floor of public spaces is becoming more common. Porcelain tiles are used. The product characteristics of these wear-resistant tiles are that they are extremely dense and simple to maintain. It is necessary to consider the cleaning and maintenance of these surfaces in order to make the best use of them.

Ceramic tile that is not glazed for use outside
When it comes to cleaning the exterior wall tiles, scrubbing and wiping with a wet cloth are usually sufficient. After the winter months, when there may be grease, soot, and other contaminants in the air on the surface, a more powerful cleaner may be necessary.